Outlined below are instructions for proper arming and disarming of your burglar alarm system (s).

To Arm:

1. Press COMMAND Button
2. Press button beneath ARM
3. Enter your code number
4. Press Yes to arm all areas authorized for your code number
5. The display reads SYSTEM ON

To Disarm:

1. Press COMMAND button until ARM DISARM appears
2. Press the blank button beneath DISARM
3. The keypad displays ENTER CODE: Enter your 4 digit security code and press COMMAND. The keypad displays ALL? NO YES> Select YES
4. If all areas have been disarmed, the keypad next displays ALL SYSTEMS OFF

To Reset AFTER an ALARM

1. Keep pressing COMMAND button until the keypad displays ARM DISARM
2. Press the blank button under DISARM
3. Enter your security code and press COMMAND. The keypad displays ALL? NO YES
4. Select YES to automatically disarm all the areas authorized for your security code.
5. If all areas have been disarmed, the keypad next displays ALL SYSTEMS OFF.

FOR EMERGENCY ASSISTANCE CALL 78(5-5555)

For administrative assistance regarding your burglar alarm system please call either David Landino (203) 432-5779 or Patrick Killips (203) 432-2873.

MSWORD Printable Version